Amaco Opalescent Glazes
Opalescent - Cone 05
Amaco® Opalescent Glazes (O Series)
All colors in the Opalescent Series are LEAD FREE.
CL glazes restricted from use K-6 (ASTM D-4236/LHAMA)
Cone 05. Although AMACO Opalescent Glazes may be used on any clay, they develop their greatest opalescence and most interesting textures when applied over red Clay such as Red Rock Red or S-Red. Most of the AMACO® Opalescent Glazes have a high gloss similar to mother-of-pearl. Best results are achieved with three or four applications of glaze. On textured ware, the glaze flows thin on relief and thick in incised areas, giving an added dimension on the surface.
AMACO® Opalescent Glazes can be used very effectively in Raku firing. Controlled experimentation with Opalescent glazes (for example O-42, O-23 at Cone 5) is suggested. When fired at this temperature on the inside of a stoneware bowl, the glaze flows to produce a variegated bottom and thins at the rim to expose more of the clay body.
AMACO Opalescent Glazes are supplied in liquid, ready-to-use form in pint jars. They are applied on a mature Cone 04 bisque by brushing, dipping, or pouring. On red bisque, these glazes should be applied rather heavily, and a slow rather than fast firing is best. Recommended temperature is Cone 05
Amaco Opalescent Glaze Color Chart -colors shown are close representations
To download a copy of the AP (Non-Toxic) colors MSDS sheet in PDF format, please click here.
To download a copy of the CL (cautions required) colors MSDS sheet in PDF format, please click here.
Opalescent Glazes show their true beauty when layered over Velvet Underglazes that have been applied to pieces with high relief or carved decoration. Look at a few of the exampes below. Amaco's brochure showing this technique can be downloaded here




Directory of Amaco glazes, underglazes and specialty products for your ceramic masterpiece.














